Section 2
page 2.5
10/95
P/N 81905903440
INSTALLATION
2
Installation
Digital Video
Physical 0 (Logical 1) = OFF (UP)
Physical 1 (Logical 0) = ON (DOWN)
NOTE: The following are logical selections. Level 0 is all switches on
(down) or all switches in the physical 1 position.
SWITCH POSITIONS
6
5
4
3
2
1
STROBE LEVEL 0
0
0
0
0
0
0
STROBE LEVEL 1
0
0
0
0
0
1
STROBE LEVEL 2
0
0
0
0
1
0
STROBE LEVEL 3
0
0
0
0
1
1
STROBE LEVEL 4
0
0
0
1
0
0
STROBE LEVEL 5
0
0
0
1
0
1
STROBE LEVEL 6
0
0
0
1
1
0
STROBE LEVEL 7
0
0
0
1
1
1
UP TO....
STROBE LEVEL 62
1
1
1
1
1
0
2.7 Level Code (Strobe) Selection Continued:
Figure 2-4 Coding Switch Locations
2.8 Output/Input Code Selection
Input and output coding switches are located on the inside of the Cougar
Digital Video Routing Switcher on the lower left corner of the backplane.
The input and output switch numbers run 0 to 7, right to left. Switch S1
(outcode switch) selects output codes 0-255 and switch S2 (incode switch)
selects input codes 0-255. Refer to Figures 2-5 and 2-6 for examples of
input and output code selection and see Figure 2-4 for the physical loca-
tion of the output and input code switches.
