PERSUIT DC 235 DUAL CONSOLE, Руководство пользователя

Страница: 26 / 120

4-2
Section 4 Electrical System
DC235
Main Distribution Panel DC235
Battery Switches
A single battery switch controls the engine
and house batteries. The engine and house
batteries can be paralleled by switching the
battery switch to "combine batteries." Cur-
rent is supplied to the automatic float switch
for the bilge pump, and the stereo memory,
when the batteries are connected and the
battery switches are "OFF".
4.3 Main Breakers/Helm
Electronics
Electronics Main
This is reserved for electronic accessories
installation. An electronic bus is located
behind the helm.
Helm Main
Supplies the 12-volt current to helm panel.
Other Breakers
All remaining devices and circuits are pro-
tected by “PUSH to reset” breakers that are
normally in the ON position. If a breaker
trips, reset by pressing the plunger. Each
breaker is labeled with the name of the
device it protects.
The stereo memory and aft bilge pump are
always ON.
Bilge pumps and bilge pumping systems are
not designed for damage control. Make sure
all bilge pumps are functioning at regular
intervals. Debris can also prevent the pumps
from functioning or operate continuously.
Make sure no debris is blocking the bilge
pump float(s).
Breakers also protect the engine charging
isolator wiring. If you experience a battery-
charging problem, check the engine isolator
breakers and reset as necessary.
NOTICE
DO NOT operate the boat with the
engine battery switch in the combine
batteries position.