Personal Circuits Midi-CV-8, Инструкция по сборке

Страница: 2 / 15

Page 2 of 15
Constructing the Gates board (labeled Midi-Seq-Gates)
1. Resistors
Install the flat resistors on the TOP of the board. Solder and clip the leads.
2. Jumpers
The TRS jack can be configured to operate as a DIN-TRS Type A jack (MIDI Standard) or as a Type
B jack. In a type A jack the Tip of the TRS acts as MIDI DIN pin 5 and the ring as MIDI DIN pin 4.
The type B jack is the opposite.
For a Type A jack install jumpers as follows:
5 - T
4 - R
For a Type B jack install jumpers as follows:
5 - R
4 - T
For type B, ensure the jumpers do not touch each other when they cross.