Personal Circuits Midi-CV-8, Инструкция по сборке

Страница: 1 / 15

Page 1 of 15
Midi-CV-8 v1.3 – Assembly Guide
Thank you for purchasing this module! This is a complicated build with tightly packed components
and precision integrated circuits. It is not recommended for the beginner.
The module is designed and sized for Eurorack systems. You will need a 16-pin eurorack power
ribbon connector with –12/0/+12 and +5V which is connected to a synth power supply.
Follow the parts lists, these instructions and the PCB silkscreen text to build the module.
The Midi-CV-8 consists of two PCB boards and a front panel.
There are components installed on BOTH sides of the boards. Please ensure that you place the
components on the correct side. When referring to the TOP of a board we mean the side with the
pmF logo. The BOTTOM has no logo.
You must follow the order of assembly as described below since some components will be soldered
underneath other components.