Perrot ZX30 Series, Руководство по эксплуатации, Страница: 5 / 8

TDP079e Rev. 26.03.2019 Page 5 / 8
Perrot REGNERBAU CALW GmbH Industriestraße 19 ‐ 29 / D ‐ 75382 Althengstett / Germany
Phone: 0049 ‐ 7051 ‐ 162 ‐ 0 / E ‐ mail: technik@perrot.de
4. Adjustments
4.1 Watering arc (setting range 30 ‐ 360°)

The arc of the part circle sprinklers is adjusted by pressing against the spring stopper,
which widens the spring. A rough alignment is possible before installation, the fine
adjustment should be made with the sprinkler running
4.2 Radius range

The radius range is set using different nozzles and pressures. For further information
see data sheet
4.3 Jet deflector screw (not available for all sprinkler models )
 The jet deflector screw is for adjustment of the irrigation near the sprinkler. If the
screw is turned further into the water jet, the precipitation close to of the sprinkler is
increased and the radius will be reduced
5. Maintenance / Cleaning / Repair

Check the sprinkler function at regular intervals

If the sprinkler or the turning device gets dirty, it should only be rinsed with clear
water. Do not use lubricants or grease, as this will damage the sliding discs in the
sprinkler!!!

Remove and repair defective parts immediately or return for repair