background image

 

 

10 

3

3

3

3

 

Front Panel Functions 

 

 

  Volume Control 

When depressed, these buttons will alter the volume setting.  The volume
adjustment range is 00 – 59. 

  Alphanumeric Display 

The display will illuminate when the power is turned on at the mains power
switch or when various remote or front panel adjustments are made.  At turn-on,
the display will illuminate with 00 and default to the CD input.  If no commands
are selected within two minutes, the display will revert to the standby mode
displaying a red dot only to indicate power is still on. 

  Source Select 

When depressed, these buttons select the desired source input. 

The order of source inputs and display indication is as follows: 

Source Input 

Display 

Compact Disc  

Cd 

Tuner TU 
Auxiliary AX 
Laser Disc 

Ld 

VCR VR 
Tape TA 

Note:  The source selector has six positions and supplies the chosen source to

the Main/Balanced outputs and VCR/Tape outputs.  If the VCR or Tape
source is selected no signal is supplied to its applicable output to avoid

the potentially damaging feed back loop which can occur if inadvertently

attempting to record and playback the same source simultaneously.

 

Содержание SM6/P




































Отзывы: