Perreaux Prisma 750, Руководство пользователя

Страница: 7 / 38

7
1 1 1 1
Unpacking and Placement
The 750 is packaged for maximum protection. Please carefully read the
instructions below before proceeding to unpack the unit. Be extremely careful.
Unpacking
Procedure
Inspect both ends of the cardboard box and open at the end without the
central staple by slitting the reinforced tape at either side.
Fold back the flaps and tip the package on end and the inner box will
slide out.
Lay the inner box down flat and upright, open it conventionally by
separating the top tray from the bottom.
The product can now be removed from the bottom packaging. This will
be easier if you have someone to help you by holding the base of the
box.
Alternately, the bottom tray and amplifier could be tipped upside down
and the bottom packaging removed. If opened in this manner, please
ensure that you turn the contents over again.
Note: Be very careful to secure the unit if you are planning to flip the package
upside down.
Remove the two white polystyrene protectors off either side of the
amplifier, leaving the black material covering.
Pull back the material and remove the protective black tissue from the
front panel.
The amplifier is now unpacked and ready for further installation.
Note: Please retain all packaging material for future transport.
Box
Contents
1 x 750 Power amplifier
1 x 750 Product manual
1 x Detachable AC power cord
3 x Performance analysis charts
Placing
Your 750
The 750 should generally be placed close to your preamplifier, keeping the
interconnect cabling short.
We strongly recommend keeping the 750 on it’s own separate shelf to allow for
proper ventilation.