PE 2525
BELT DRIVE - MADE IN GERMANY
4
2. Unpacking
We have developed a high-quality packaging, so that
the product arrives you safe and protected. Carefully
remove the unit and accessories from the packaging
and check the contents for completeness.
Items delivered:
1x chassis with pre-assembled tonearm incl. pick-up
cartridge
1x sub-platter, 1x platter
1x dust cover
1x flat rubber drive belt
1x RCA cable with ground wire
1x Hex key SW3 (transport lock, tone arm height
adjustment)
1x setup template
1x pair of cotton gloves (white)
Please keep the original packaging in order to protect
the device in case you ever need to ship it or transport
it. Make sure to tighten the locking screws when you
transport the turntable. The 3 x 2 silver-colored locking
screws must be removed completely before first use
(see fig.
F 1
). For this purpose, please use the
enclosed hex key SW3.
You can keep the screws for possible transports in the
provided plastic bags.
F 1
- Undo and remove
the locking screws
