4
ROHO MOSAIC Cushion Operation Manual
Warnings:
-
DO NOT use a product that is underinflated or overinflated, because 1) the product benefits will
be reduced or eliminated, resulting in an increased risk to skin and other soft tissue, and 2) the
individual may become unstable and vulnerable to falling. Carefully follow the instructions for
inflation, placement and hand check.
-
After setting up the cushion the first time, check inflation frequently, at least once a day. Follow the
H
AND
C
HECK
instructions. See the next page.
-
If the product does not appear to be holding air, or if you are not able to inflate or deflate the
product, see
T
ROUBLESHOOTING
. Immediately contact your equipment provider, distributor, or ROHO,
Inc. if the problem persists.
-
When possible, use the hook or loop fasteners to further secure the cushion to the seating surface.
Cushion Instructions:
C
USHION
I
NFLATION
and
C
OVER
P
LACEMENT
Cushion Inflation:
1. Overinflate the cushion:
a. Slide the hand pump nozzle over the
inflation valve. Open the inflation valve.
b. Inflate the cushion until all of the air cells
feel firm.
c. Close the inflation valve and remove the
hand pump.
2. Carefully follow the instructions for
C
OVER
P
LACEMENT
.
Cover Placement:
Note: Keeping a cover on your cushion will help
to protect the cushion components. A cover will
also help to keep the air cells together, which
may aid in slide board transfers.
3. Place the cushion inside the cover:
a. Unfold the cover.
b. Insert the cushion.
c. Close the zipper.
Note: When covered, the cushion should lie flat
on the chair (non-skid material on the bottom).
4. Carefully follow the instructions for
C
USHION
P
LACEMENT
and
H
AND
C
HECK
. See the next page.
Back
Front
Heavy Duty Cover (COV-HD):
The inflation valve
should point toward the zipper.
Zipper
Inflation Valve
D A T E :
YYYY/MM/DD
S I Z E :
i n c h e s : c e n t i m e t e r s :
F I T S C U S H I O N S :
REF
COV-HD1211
1R1211C, 1R1211HD,
QS1211C, CS1211C,
1RHE2220C-SR, 2RHE2220C,
1R1211H-CH-XX, 1R1211M-CH-XX
23 x 20.25 x 4.25
58 x 51.5 x 10.5
Standard Cover:
The corners of the cushion should be visible
through the corner openings of the cover.
Back
Front
Zipper
Inflation Valve
Corner Opening (x4)
Close
Open
Carrying Handle
