Permobil PP1c, Руководство пользователя, Страница: 9 / 12

-9-
Owner´s Manual PP1c Service Menu
Turning Speed
Here you can set the maximum and minimum speed for turning. Key in the desired value
with the arrow keys, up = higher value, down = lower value, between 0-100. Then press
Enter. For default values see the Table. NB! Be very careful with this adjustment,
incorrect performed adjustment could make the wheelchair hard to handle, causing
hazardous situations.
Power
(This function is not availible on chairs with a power module manufactured before Feb .2002)
Can be used to regulate the power of the engines. Key in the desired value with the arrow
keys, up = higher value, down = lower value, between 10-100. Then press Enter.
For default values see the Table.
Sleep Timer
Sets the period of time before the control system will ”go to sleep” if the joystick is not
operated. The time can be set between 1 and 10 minutes in steps of 1 minute. If the time
is set to 0 the system will never ”go to sleep”
Park Brake Trip
This tells the control system whether or not to trip if one or both of the solenoid brakes
become disconnected or are not fitted. You can turn this function on or off.
NB! This function should only ever be turned off if there are no solenoid brakes
fitted on the wheelchair.
Joystick Throw
This allows you to program the control system so that full speed can be reached with a
reduced joystick movement (throw).
Steer Correct
This factor compensates for any mismatching of motors to ensure that the wheelchair
drives directly forward when the control system´s joystick is being pushed directly forward.
It is normally set to zero but may be varied from -9 to +9 in increments of 1. If the chair is
veering to the left, you should increase the setting. If the chair veers to the right, decrease
the setting.
Read Timer
The Pilot+ has a timer which records how long the wheelchair is in use. The timer runs
whenever the joystick is moved away from the center position, and stops when the
joystick is returned. The timer records the number of hours the wheelchair has been in use.
Clear timer
This allows you to reset the timer to 0 hours. It is recommended that the timer be left intact
and not cleared. This information can be useful to the drive system's manufacturer when
performing diagnostics.
Back to Root
This takes you back to the ROOT menu.