Permobil K450 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 112

Permobil K450 Скачать руководство пользователя страница 7

Permobil K450 Owner´s manual

Important information

7

Technical support

In the event of technical problems, you should contact Permobil.
Always state the seats serial number when contacting Permobil to ensure that

the correct information is provided.

spare part & accessories

Spare parts and accessories must be ordered through Permobil.

scrapping

Contact Permobil BV for information about scrapping agreements in force.

warranty

All wheelchairs are supplied with a two-year product guarantee. Batteries and char-

ger are supplied with one year warranty.

Incident reporting

If an incident occurs please contact your nearest Permobil representative.

Normally the same person you contacted at purchase day. To prepare this

contact there is a link on our homepage, on the internet, at www.permobil.com.

Open up your country page and the contact page. Here is the needed contact

information and a guidance document in what information we need to investigate

the incident. Complete the information as much as possible. This is of great help

for us.
To increase the product quality and to ensure that our product is safe through

the whole life cycle we need you to send in Incident Reports. It is also stated in

MEDDEV 2.12-1 and Annex 9 that the manufacturer shall

“Encourage users or

those given specific responsi-bility for reporting incidents that have occurred
with medical devices and that meet the criteria within these guidelines to report
the incidents to the Manufacturer and or to the Competent Authority in accor-
dance with national guidance”.

To meet the requirements and to ensure that our products shall remain safe in

your hands we need your assistance. We hope you never need to use the infor-

mation on this page but if there is an incident please contact us.

Product approval

This product fulfill the requirements according to EN 12184 and ISO 7176.

«
...
5
6
7
8
9
...
»

Содержание K450

















































































































Отзывы:

Нет отзывов