Cushion Care Guide - Comfort Company Cushions
2
SAFETY SYMBOLS
WARNING
Indicates that not following the specified
procedure could lead to potentially hazardous conditions
resulting in serious injury.
CAUTION
Indicates that not following the specified
procedure could lead to potentially hazardous conditions
resulting in minor to moderate injury or damage to the
equipment or other property.
COVER CARE INSTRUCTIONS
WARNINGS:
-
Follow all manufacturer bleach container and germicidal disinfectant safety guidelines.
-
Before transferring to a new user, the product must be completely cleaned and disinfected.
-
Periodically, check the cover and components for damage and wear, and replace if necessary. Some wear with regular use
is expected.
CAUTION:
Frequent heat drying and bleaching will cause fabric to break down. Air drying and cleaning without bleach
are recommended whenever possible to help extend the life of the cover.
SURFACE CLEANING AND DISINFECTING
COMFORT-TEK FABRIC ONLY
Spray with common household or commercial antibacterial cleansers or disinfectants. Wipe with a damp,
water-only cloth after disinfecting. Let dry completely before use.
CLEANING AND DISINFECTING
ALL FABRICS
CAUTIONS:
- Remove hook fastener pieces from the cover before cleaning and disinfecting. Hook fasteners may snag the fabric,
causing changes in the appearance (but not the effectiveness) of the fabric.
- Remove the cover from the foam and any inserts before cleaning or disinfecting.
To clean the cover:
When possible, hand wash in warm water with mild detergent, rinse
thoroughly with clean water, and air dry (let dry completely before use). Or machine wash using
common laundry detergent and tumble dry low. DO NOT steam clean or autoclave. DO NOT
iron.
OR
40C
To disinfect the cover:
Machine wash hot (without the foam or inserts) using common laundry detergent.
Tumble dry low.
60C
FOAM CARE INSTRUCTIONS
WARNINGS:
DO NOT use contaminated foam with multiple users. Disinfectants are NOT effective on porous surfaces
such as foam. Replacement foam components may be purchased separately.
CAUTIONS:
DO NOT submerge the foam in any liquid, including water. The foam should not be exposed to light for any
extended period of time. Light will cause discoloration of the foam.
Note: Discoloration will not affect the functional features. There is no need to attempt to “clean” discoloration caused by light
exposure.
To clean the foam:
Soiled foams should be replaced. Remove the cover. Wipe lightly with a damp cloth.
DO NOT use soap. Let dry completely before replacing the cover.
CARE SYMBOLS
Wipe with a damp cloth.
Hand wash.
Dry flat.
Line dry.
40C
Machine wash warm.*
60C
Machine wash hot.*
Tumble dry low.
Do not tumble dry.
*maximum temperature shown