Permobil Chairman HD3, Руководство по обслуживанию

Страница: 12 / 32

12
Brake release cables
Fig. 16. Brake release mechanism.
1 2
Brake release cables
The upper cable controls the left brake unit and the lower cable controls the right brake unit.
Removal
1. Make sure the brakes are engaged.
2. Raise the seat elevator to its highest position.
3. Remove the battery and seat elevator covers, se page 8.
4. Slacken the locknut, see fig. 16:2.
5. Screw the adjusting screw fully in, see fig. 16:1.
6. Detach the cable at the magnetic brake and brake release mechanism.
Fitting
1. Attach the cable to the magnetic brake, then to the release lever.
2. Adjust the length of the cable sleewe using the adjusting screw (16:1), so that the cable is tensioned
but does not pull the brake release arm.
3. Check the operation. Operate the release lever to release the brake and check that the wheel can turn.
4. Tighten the locknut (16:2).
5. Refit the covers.