Permobil Chairman 2k, Руководство по обслуживанию

Страница: 9 / 40

9
Batteries
Batteries
NB! Use protective goggles when working with
batteries.
Removal
1. Place the wheelchair on a level surface.
2. Put the circuit breaker in the “OFF” position.
It is accessible through a cut-out in the chassis
cover, see fig. 9.
3. Lift the chassis cover up a little by loosening
the knob holding the cover on, see fig. 9.
4. Open the battery covers by loosening the knob
and dropping the covers down, see fig. 10.
5. Draw the respective batteries straight out
using the battery strap, see fig. 11.
6. Loosen the battery connections. See the decal
on the inner side of the battery covers.
7. Lift the batteries out.
Insertion
1. Lift two new batteries into place. Put the strap
back around the new batteries in order to
facilitate removal.
2. Connect the battery connections. See the
decal on the inner side of the battery covers.
3. Push the batteries back into the chassis.
4. Close the battery covers and tighten the knob,
see fig. 10.
5. Tighten the knob for the chassis cover, see fig. 9
6. Set the main fuse to the “ON” position. It is
accessible through a cut-out in the chassis
cover, see fig. 9.
Fig.10. Battery cover knob.
Fig. 11. Draw out the battery.
Fig.9. Circuit breaker 63A (On/Off) and
the chassis cover knob.
On
Off