Permobil C400 Скачать руководство пользователя страница 82

Страница: 82 / 100

Permobil C500 Owner´s Manual

Maintenance and repairs

Inner tube replacement, front tire

Chock up the wheelchair so that the wheel turns freely and let out the air.

Take the tire off the wheel rim.

Replace the inner tube.

Put the tire back on the wheel rim and fill with air.

Inner tube replacement, rear tire

NB!

Applies only if your wheelchair is fitted with pneumatic rear tires.

Chock up the wheelchair so that the wheel turns freely and let out the air.

Take the wheel rim apart by unscrewing the five Allen screws that hold it

together.

Replace the inner tube.

Put the wheel rim together with the tire. Check that the inner tube is not

caught between the halves of the wheel rim. Fill the tire with air.

The recommended tire pressure for front and rear tyres is 200-250 kPa (2-2.5 bar). Overfilling

entails a risk of explosion.
The incorrect tire pressure may result in lower stability and maneuverability. So check regularly

that the tires have the correct pressure.

WARNING

Содержание C400





































































































Результаты поиска

Содержание C400

Отзывы:

Похожие инструкции для C400

Бренды по названию

Популярные бренды

Permobil C400, Руководство пользователя

Результаты поиска

Содержание C400

Отзывы:

Похожие инструкции для C400

Бренды по названию

Популярные бренды