Permobil ATI, Руководство по эксплуатации

Страница: 6 / 24

ATI Operation Manual
4
ADJUSTMENT AND PLACEMENT
ATI Adjustment
WARNING: The ATI should only be adjusted by a clinician, ATP, or a
certified technician.
WARNING: To avoid injury, hold securely and use extreme caution
when installing, adjusting, removing or otherwise handling the ATI.
Instructions: Using the provided bending tool, follow these instructions to
bend the ATI fingers. See below for possible ways to use the ATI.
1. Bend: Begin with a more aggressive bend to the ATI fingers. This will
allow you to see how the cushion is affected by the ATI.
2. Check : Place the ATI in the cover (see “ATI Placement” below). Have the
user transfer onto the cushion. Evaluate to see if the ATI fingers should
be bent less or differently.
3. Bend again : If needed, reduce the amount of bend. First, have the
user transfer off the cushion and remove the ATI from the cover. Then,
make any desired adjustments to the ATI fingers.
4. Repeat steps 2 and 3 as needed, to reach the desired positioning.
Ways to use the ATI Example
Increased pelvic support:
Side view
Rear Front
Lower extremity alignment:
Front view
Right side Left side
Pelvic obliquity (tilted pelvis):
Rear view
Left side Right side
ATI Placement
1. Unzip the cover.
2. Place the ATI beneath the cushion and inside the cover.
a. The straight edge of the ATI should face the front of the cushion.
b. If using the Incontinence Liner: Place the ATI beneath (not inside) the
Incontinence Liner.
3. Close the zipper.