© 2017 - perma-tec
GmbH & Co. KG
|
www.perma-tec.com
|
5
2.2 Remote mounting with tube
• Keep connection lines as short as possible and use tubes with an inside diameter of at least 6 mm.
Keep in mind that tube length and bore diameter of bearing housings affect pressure and discharge
period of the lubrication system.
• For installation of perma STAR VARIO use Mounting bracket 1-point G1/4 female (109663).
• Secure tubes with suitable fastenings (brackets, cable ties) to protect against damage and tearing.
• Depending on lubricant and ambient temperature, different tube lengths are possible, e. g.
perma Multipurpose grease SF01:
5 m (+20 °C).
Reducer for thread connection
Remote mounting is recommended if,
• the ambient temperature of the lubrication point is permanently higher than +60 °C
• the lubrication point is exposed to high vibrations
• no direct access to lubrication point is possible due to safety issues (e. g. removal of protective
screens, safety walls or cages)
• it is difficult or dangerous to access the lubrication point
• the lubrication system is exposed to mechanical forces (e. g. falling rocks)
Mounting bracket STAR Standard Duty
1-point G1/4 female (109663)
Hose connector G1/4 male for hose iØ 9.5 mm -
push-lock (101554)
Heavy Duty hose up to +100 °C oØ 16 mm x iØ 9.5 mm
(101555)
Hose connector G1/4 male for hose iØ 9.5 mm -
push-lock (101554)
Support flange STAR Gen 2.0 G1/4 male x
G1/4 female (109420)
All metal to metal connections must be
glued together with Loctite® 243™.
