
5
Additional and replacement parts shall be obtained
only from the manufacturer.
This bed rail should not be used on a sleeping
surface that is more than 600mm (23.6”) from
the floor.
To prevent risk of strangulation it is essential to
ensure that when the bed guard is fitted into
position, there is a gap of at least 250mm (9.8”),
between each end of the bed and the corresponding
end of the bed guard.
Care should be taken in unpacking and assembly.
Fit the bed rail so that its side, when in the locked
position or when placed in the fitted position,
touches the side of the mattress.
This bed rail shall not be used unless the fittings
are in place and securely attached to both the bed
and/or the mattress and the bed rail.
Once fitted in place, the bed rail should be checked
to ensure that it is properly fitted and secure.
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNINGS
Содержание Grey 2774
Страница 16: ......