Perma Pure Baldwin series, Инструкция по эксплуатации

Страница: 3 / 9

Section A: Specifications 3
A: S
PECIFICATIONS
General Specifications
Probe 18" Stinger probe, 0.5" dia x .065" wall, 316L SS tubing
Calibration Integral calibration on both sides of filter element
Heater Temp Control External regulated (standard)
Connections 1¼" male pipe nipple mount; ½" male pipe thread adapter
Connectors ¼" cal gas, ¼" sample line
Thermocouple Type K
Blowback Single direct; 2-way solenoid blowback / calibration valve
Blowback Tank 16 ga. SS, 4" x 8", leak checked, pressure tested
Heat-shrink Boot 7" length, 2.75" min expanded I.D. nose
O-rings Viton
®
Gaskets Graphoil
Dimensions 14" x 12" x 8" HWD (w/o Stinger probe)
Weight 34 lbs
Operating Specifications
Calibration Gas Requirement 20 psig, 6-10 LPM
Probe Operating Temperature 375ºF (190ºC)
Blowback Duration 5 sec standard (30 sec maximum)
Blowback Valve 24 VDC
Blowback Flowrate 14 scfh
Instrument Air for Blowback Min 50 psig, Max 90 psig
Material Specifications
Enclosure Material NEMA 4 Steel
Probe Stinger 316L SS tubing (standard)
Schedule 40
Schedule 80
Durinert
®
coated
Hastelloy
®
Heater Type Cartridge Heater, 350W (standard on external temp regulated)
Enclosure Insulation Material
⅛" thick silicone, medium density
Filter Chamber Material 316 stainless steel
Filter Element Types 10 micron sintered SS (standard)
5, 20 micron sintered SS
2 micron ceramic
2 micron SS screen mesh