Perlick BBR96, Руководство по обслуживанию

Страница: 51 / 76

Temperature
Probe
Bracket
51 Return to Table of Contents
Back Bar Operation Installation Manual
STEP 1.
STEP 2.
STEP 3.
STEP 4.
STEP 5.
STEP 6.
Figure 7-16. Temperature Probe and Bracket
•
See Table 7-5 for temperature to
resistance values when
troubleshooting probe or tempera-
ture issues.
Table 7-5. Temperature – Resistance Values
7.5.4
Temperature Probe
Each refrigerated zone has one 10K
ohm NTC probe, which senses com-
partment temperature. Sensing probe
is located behind evaporator fan panel.
To replace temperature probe, refer to
section 7.5.3.
7.6 LED Lighting
7.6.1 Replace LED Light Strip
ELECTROCUTION HAZARD!! Never attempt
to repair or perform maintenance on unit
until main electrical power to the unit has
been disconnected!
Open door or remove upper drawer. See Figure
8-13.
Using a flat blade screwdriver, carefully pry off the
lens cover. See Figure 7-4.
Remove two screws securing LED light to housing.
Unplug the LED from the wiring harness.
Plug new LED into harness and secure to housing
using screws removed in step 2.
Snap LED cover into place.
TEMPERATURE
(°C)
TEMPERATURE
(°F)
RESISTANCE
(OHMS)
45 113 4911
50 122 4160
55 131 3536
Tools required
TEMPERATURE
(°C)
TEMPERATURE
(°F)
RESISTANCE
(OHMS)
-30 -22 111300
-25 -13 86430
-20 -4 67770
-15 5 53410
-10 14 42470
-5 23 33900
0 32 27280
5 41 22050
10 50 17960
15 59 14690
20 68 12090
25 77 10000
30 86 8313
35 95 6940
40 104 5827