© 2009
24” Signature Series Operation / Installation Manual
Primary Key Functions
LED Alerts
Turns on/off the power to the unit
Disabled
Manually defrosts the unit by holding button down
Displays minimum stored temperature, also used
for navigating control codes and changing
displayed values within the various menu options
Displays maximum stored temperature, also used
for navigating control codes and changing
displayed values within the various menu options.
Fast freezing cycle is started by holding button
down for 3 seconds.
Displays and allows setpoing adjustment.
Used to select a parameter or confirm
an operation in programming mode. If held for 3
seconds while max or min temperature is displayed,
it will erase that temperature from memory.
?
SYMBOL
STATUS
ALERT DEFINITION
ON
FLASHING
FLASHING
ON
ON
ON
ON
FLASHING
The compressor is running
Anti-short cycle delay enabled (Programming phase when flashing with )
Programming phase
The defrost is enabled
Drip time in progress
Alarm signal: Contact Service Representative immediately
The fast-freezing cycle is enabled
The light is on
figure . control Panel
