© 2008
7
24" C-Series Operation / Installation Manual
Ø
1
/
8
”
1
/
2
” Deep
17
/
3
2
”
1
2
5
/
3
2
”
R 1
11
/
16
”
2
”
3
7
/
3
2
”
3
/
64
”
Detail A
S
c
ale 1:
2
All featu
r
e
s
c
alled out
in thi
s
detail view appl
y
onl
y
to panel
s
being
u
s
ed on lo
c
king doo
rs
3
/
4
”
2
6
35
/
64
”
2
9
3
/
8
”
22
3
/
16
”
0
11
/
3
2
”
15
/
3
2
” Deep hole d
r
illed at both end
s
7
/
16
”
13
/
64
”
19
/
64
”
2
9
13
/
16
”
Rea
r
View
13
/
64
”
22
2
3
/
3
2
3
”
22
3
/
16
”
19
57
/
64
”
13
9
/
3
2
” 10
9
/
3
2
”
3
11
/
16
”
3
11
/
16
”
2
7
/
3
2
”
0”
2
7
/
3
2
”
0”
13
39
/6
4
”
15
7
/
64
”
Lo
c
king doo
r
onl
y
16
39
/
64
”
1 1/16"
A
The
s
e (
2
) hole
s
not to
be d
r
illed fo
r
a doo
r
with lo
c
k
Ø
3
/
4
”
Th
r
u
2
7
/
64
”
1
13
/
64
”
2
1
/
8
”
13
/
16
”
11
/
64
”
2
7
/
64
”
19
/
3
2
”
Figure 8. Solid Wood Overlay Door Panel
3. Install lock strike, lock washer and screw.
4. Use the key to turn the lock and verify that the lock and unlock posi-
tions are correct: unlock should be up, lock should be horizontal.
Adjust as necessary.
5. Install overlay with lock assembly to the door.
6. Install lock bracket to the unit.
Handle Installation
CAUTION
Handle mounting on wood overlay door should be mounted on
overlay panel only (not the door) to avoid damage to the fac-
tory door.
1. Handle must be attached to overlay before mounting overlay onto
door. Mark rear of wood overlay panel with handle fastening loca-
tions.
2. Drill through wood overlay panel at marked locations taking care not
to damage the wood overlay panel.
3. Countersink screw heads so screw heads are flush with backside of
panel. Attach handle to overlay panel.
Overlay Installation
CAUTION
Proper wood working tools should be used to avoid damage or
errors in workmanship.
1. With the unit secured in position, open the door and make sure panel
pre-drilled holes align with door frame holes.
2. Loosely attach four corners of the overlay panel to the door using #10
x 1" wood screws, installed through the door frame from the rear.
3. Check for overall wood overlay panel fit, position and function. Make
minor adjustments as necessary. When panel is properly aligned,
tighten mounting screws securely. Install the rest of the mounting
screws and tighten securely.
CAUTION
Do not overtighten wood overlay attachment screws as this
may damage factory supplied door frame.
