WARNING:
●Avoid potential personal injury or property damage! DO NOT over-tighten the lag
screws [A1]. Tighten the lag screws [A1] only until they are pulled firmly against the wall
plate.
●Ensure the wall plate [01] is securely fastened to the wall before
continuing to the next step.
● Any material covering the wall must not exceed 5/8 in. (16 mm)
● Mount
the wall plate
directly onto the concrete surface
● Minimum solid concrete thickness: 203 mm (8 in.)
● Minimum concrete block size: 203 x 203 x 406 mm (8 x 8 x 16 in.)
● Never drill into the mortar between blocks
Wall
Anchor
A2
Step 3B Solid Concrete or Concrete Block Option
3A-4
ø5/32 in.(4 mm)
2 3/4
in.(70mm)
3A-5
1/2 in.(13mm)
Socket Wrench
(Not included)
Drill 4 pilot holes using a 5/32
in.(4 mm) mm diameter drill bit.
Make sure the depth is not less
than 2 3/4 in.(70mm)
Install the wall plate using 4 lag
screws [A1]. Tighten the lag
screws [A1] only until they are
pulled firmly against the wall plate.
A1
HEAVY! You may
need assistance with
this step.
