Perlesmith PSLFK5, Руководство по установке

Страница: 6 / 12

6
WARNING:
●Avoid potential personal injury or property damage! DO NOT over-tighten the lag bolts
[A1]. Tighten the lag bolts [A1] only until the washers [A2] are pulled firmly against the
wall plate.
●Ensure the arm assembly/wall plate[01] is securely fastened to the
wall before continuing on to the next step.
● Any material covering the wall must not exceed 5/8 in. (16 mm).
● Mount the arm assembly/wall plate [01] directly onto the concrete surface.
● Minimum solid concrete thickness: 203 mm (8 in.).
● Minimum concrete block size: 203 x 203 x 406 mm (8 x 8 x 16 in.).
Wall
Anchor
A3
Step 2B Solid Concrete or Concrete Block Option
ø10mm
65mm
Drill 4 pilot holes using a 10mm
diameter drill bit. Make sure the depth is
not less than 65mm. Never drill into the
mortar between blocks.
2B-1 2B-2
UP
Position the wall plate template
[08] at your desired height, level
the template and mark the pilot
hole locations.
08
Ensure alignment
using the bubble level.