Perlegear PGUE1, Инструкция по эксплуатации

Страница: 4 / 8

1/2 in.(13mm)
Socket Wrench
[Not Included]
Step 1
Connect the TV Wall Mount (Not Included) to the
Extension Bracket
Connect the TV wall
mount (not Included) to
the extension bracket by
washer [A] and nut [B].
Step 2
●Avoid potential personal injury or property damage! DO NOT over-tighten
the lag screws [A1]. Tighten the lag screws [A1] only until the washers [A2]
are pulled firmly against the extension bracket [01].
● Ensure the extension bracket [01] is securely fastened to the wall before
continuing to the next step.
● Any material covering the wall must not exceed 5/8 in. (16 mm)
● Nominal wood stud size: common 2 x 4 in. (51 x 102 mm) minimum
1½ x 3½ in. (38 x 89 mm)
● Stud center must be verified
WARNING:
Install the Extension Bracket on Wood Stud
Fully unfold the extension bracket and make
sure the two halves are flushed with each
other.
01
B
A
B
A
Note:
Do not firmly tighten
the nuts to keep the
sliding function.
01 02 03 04 05