Perle Standalone-S10-GR-STS-Installation Guide
15
Installing the Simplex Fiber
Cable
1.
Locate 1000/10GBase-X compliant simplex (1-
strand) fiber cables with appropriate
connectors.
2.
Connect the fiber cables from the SFP/SFP+ to
the other media converter/switch/fiber device.
Temperature Protection
Every S-10GR-STS comes equipped with an internal
fan to provide cooling to the unit. The fan will
come on during power up and then turn off. It will
only come on when the temperature inside the
case becomes elevated. If the module is operating
above its specified maximum operating
temperature, the S-10GR-STS will reduce the
power to the module. The S-10GRT will continue to
monitor the operating temperature of the unit
until the temperature is below the maximum
operating temperature and then the S-10GT-STS
will return the module to normal operating.
Loopback Mode
The media converter can be put into Loopback
mode for diagnosis purposes. A packet generator
and analyzer must be used to generate and capture
the packets in this mode.
