IRG5540 Series Routers Quick Start Guide 5500451-10 (Rev A)
Version #A11.08.2019
3
Connecting the Antennas
1.
Connect your cellular antenna to connector
Main.
2.
Connect the diversity antenna to connector
Diversity.
3.
Connect a WLAN antenna to connector
WLAN-1.
4.
Connect a WLAN antenna to connector
WLAN-2.
5.
Connect your GPS antenna to connector
GNSS
.
See
Figure 2
Connecting the Power
See
Figure 2
for wiring requirements. Colors indicated are
for the Perle supplied DC cable.
Connecting to the Cellular Network
When the router is powered on, it begins the process of
activation and attempts to connect to the cellular network.
This process typically takes a few minutes. A successful
connection is indicated by a solid green Internet LED, if not,
see the IRG5540 Series Routers Hardware Installation Guide
for details.
