IOLAN SDG4 P/STG4 P Quick Start Guide- P/N 5500423-10 (Rev C)
2
Hardware Overview
Back View SDG4 P/STG4 P with connector for Barrel Connection
Button/Switch Functions
Reset Button
The inset RESET button will reboot the IOLAN if pushed in and released quickly. It
will reset the IOLAN to factory defaults if pushed in and held for more than three
seconds
Console Switch
The IOLAN is set in the factory to serial (up position). Unless you plan to attach a
console to the IOLAN, leave the dip switch in the serial position. If this DIP switch is
set to the down position, then the serial port is in console mode. In console mode,
the port provides access to the IOLAN management function using the industry
standard CLI command set. See the IOLAN Command Line Interface Reference
Guide.
Connecting the Hardware
Connecting the barrel connector
Plug the barrel connector end into the IOLAN, then plug the power adapter into a
power source. The Power/Ready LED should show a solid green after the boot
sequence.
