IOLAN SDG4 P/STG4 P Hardware Installation Guide 8
To set serial port 1 in this mode, ensure that the “console/serial DIP switch” is in the
serial (up) position.
Connecting Data Ports
Ethernet Connection
By default the 10/100/1000 Ethernet port will automatically set itself up to match the
speed of the port it is connected to. If auto negotiation is not supported by that port
then, the port can be configured to operate at a fixed speed and duplex settings.
To connect to 10Base-T, 100Base-TX or 1000Base-T follow these steps:
1. Connect a straight through Ethernet cable from the IOLAN’s Ethernet port to an 10/
100/1000 RJ45 port on the network hub/switch.
2. Once the IOLAN is connected and the link is established, the link LEDs will turn on.
These LEDs will indicate whether you have a 10, 100 or 1000 Mbps link to your hub/
switch. See. (
) for more details.
Ethernet Connector - 8-pin RJ-45
