Installation 22
IDS-509-SFP Hardware Installation Guide
Warning:
In hazardous location installations, failure to remove the power from the source
prior to completing the connection/s to the SFP slot/s could cause an electrical arc result
-
ing in a possible explosion.
Removing SFPs
SFP modules are inserted in the SFP slots on the front of the IDS switch.
1. Disconnect the fiber cable from the SFP module.
2. If the SFP module is equipped with a clasp, move it to the locked position and use the
clasp to pull the SFP towards you.
3. If the SFP module is not equipped with a clasp, then with your fore finger and thumb,
firmly grip the SFP and pull towards you.
Warning:
In hazardous location installations, failure to remove the power from the source
prior to removing the SFP modules from their slots could cause an electrical arc resulting
in a possible explosion.
Note:
Changing the SFP to one that operates at a different speed (ex. 1000Mbps to
100Mbps) will require a reboot of the switch.
Resetting the Switch
The Reset/Fast Setup button is located near the bottom of the switch. A small tool such as
a paper clip is needed to access the recessed button.
Содержание IDS-509-5SFP
