Perle 10/100/1000 Media Converter Module – Installation Guide
11
7. Remove the dust cap from the fiber connector and
connect the fiber and copper cables.
Removing Media Convert Modules
1. Loosen the captive retainer screw on the front of the Media
Converter Module and gently pull the Media Converter
Module out.
2. If not inserting a replacement, cover the opening slot with a
face plate and secure the screw.
Installing the SFP Fiber Module
•
C-1110-SFP and CM-1110-SFP require an SFP fiber
module. Locate appropriate fiber module and insert into
opening.
•
Ensure the SFP module is properly seated.
•
SFP module may be inserted before or after the Media
Converter module is inserted into the chassis.
•
Proceed with cable connections.
