Perle 10G Media Converter module Installation Guide
12
Operation
Status LED
The Perle 10G Media converters modules have three status LEDs
located on the front panel of the module.
PWR - Power/Test
Green On:
Power is on and the unit is in normal operation mode.
Green blinking slowly:
The unit is in test or loopback mode
.
Red blinking slowly while in Test mode:
Indicates an error
within the last second.
Red Solid: During Power up:
Hardware Error detected. (See
PWR Red LED Errors)
Red Blinking quickly:
Error detected. See LK1 LK2 Error codes.
Red (Solid or Blinking):
A module has been inserted that is
requesting more than the specified maximum power for that port.
LK1- Port 1 Activity
On:
Fiber link present.
Blinking quickly:
Fiber link present and receiving data.
Blinking slowly:
The fiber link has been taken down as a result of
Smart Link Pass-Through.
Off:
No fiber link present.
LK2
– Port 2 Activity
On:
Fiber link present.
Blinking quickly:
Fiber link present and receiving data.
Blinking slowly:
The fiber link has been taken down as a result of
Smart Link Pass-Through.
