The warning label for derating engine information is
supplied loose. The warning label for derating engine
information is located on the control box. Refer to
Original Equipment Manufacturer (OEM) information
for the location of the control box.
i07199910
Additional Messages
Illustration 11
g06249496
Typical example
The labels will be installed on both engine oil coolers.
A special starting procedure may be required. Refer
to this Operation and Maintenance Manual, Before
Starting Engine for the correct procedure.
i09119848
General Hazard Information
Illustration 12
g00104545
Attach a
“
Do Not Operate
”
warning tag or a similar
warning tag to the start switch or to the controls
before the engine is serviced or before the engine is
repaired. Attach the warning tags to the engine and
to each operator control station. When appropriate,
disconnect the starting controls.
Do not allow unauthorized personnel on the engine,
or around the engine when the engine is being
serviced.
• Tampering with the engine installation or
tampering with the OEM supplied wiring can be
dangerous. Personal injury, death and/or engine
damage could result.
• Vent the engine exhaust to the outside when the
engine is operated in an enclosed area.
• Wear a hard hat, protective glasses, and other
protective equipment, as required.
• When work is performed around an engine that is
operating, wear protective devices for ears to help
prevent damage to hearing.
• Do not wear loose clothing or jewelry that can
snag on controls or on other parts of the engine.
• Ensure that all protective guards and all covers
are secured in place on the engine.
• Never put maintenance fluids into glass
containers. Glass containers can break.
• Use all cleaning solutions with care.
• Report all necessary repairs.
Unless other instructions are provided, perform the
maintenance under the following conditions:
12
SEBU8430-02