Illustration 76
g06159487
1.
Note the location of clamp (2). The clamp (2) must
be between the marked location (A).
2.
Loosen clamp (2) and remove outer filter (3) from
DEF tank header (1) and discard outer filter (3).
Illustration 77
g06159580
3.
Remove screws (7) and remove retaining plate (6).
4.
Remove DEF filter (5) from pickup tube (4) and
discard the used filter (5).
5.
Install new filter (5) onto pickup tube (4).
6.
Install the retaining plate (6) and install screws (7).
Tighten screws (7) to a torque of 1.1 N·m
(9.8 lb in).
7.
Install new outer filter (3) onto DEF tank header
(1). Ensure that the clamp (2) is located between
the location points (A).
8.
Tighten clamp (2) to a torque of 4.5 N·m (40 lb in).
9.
Install the DEF tank header, refer to Disassembly
and Assembly, Manifold (DEF Heater) - Remove
and Install.
i07297213
Diesel
Exhaust
Fluid
(Emission
Related
Component)
-
Fill
Refer
to
the
original
equipment
manufacture
information
for
the
Diesel
Exhaust
Fluid
(DEF)
tank
capacity.
Illustration 78
g03379943
Lockable type DEF Filler cap
M0087475-03
95