PerkinElmer AVIO 500, Руководство по оборудованию и обслуживанию для клиентов

Страница: 37 / 355

35
Instrument Safety Practices
Safety Interlocks
The instrument has safety interlocks to protect the operator from radio frequency
(RF) radiation and ultraviolet radiation, and to prevent access to high voltage areas.
The following interlocks must be satisfied in order to ignite the plasma. If any of
these interlocks is interrupted while the plasma is on, the plasma will automatically
be shut down.
•
The front door on the torch compartment must be closed before the plasma can
ignite.
• Argon pressures for the torch must be correct.
• Emergency Off Switch must be released.
• Cooling water must be flowing to the oscillator.
• Quick change torch must be installed.
• The shear gas must be flowing.
Radio Frequency Radiation
The instrument generates high levels of Radio Frequency (RF) energy, which is
potentially hazardous if allowed to escape. The instrument is designed to contain
the RF energy within the shielded enclosures of the sample compartment and the
RF power supply. Safety interlocks prevent you from operating the system without
all covers, doors, and shields in place.
Ultraviolet Radiation
The plasma generates high intensity ultraviolet radiation. A safety interlock is used
to automatically shut off the plasma if the torch compartment door is opened or the
Do not attempt to defeat the safety interlocks. This would place the
operator's safety at risk.
Avertissement:
Ne pas tenter de contourner les verrous de sécurité. Cela placerait la
sécurité de l'opérateur à risque.
!
Warning