Perkin-Elmer XRpad2 4336 Скачать руководство пользователя страница 39

Страница: 39 / 67

68153 01

www.perkinelmer.com

XRpad2 4336

IGIT

MAGING

8.7.1

Wired X-ray Detector Connection

Figure 7

shows the wired connection of the X-ray detector in a clinical environment. In the wired

application, the X-ray detector is connected to the XRpad IPU-2, which powers the X-ray detector

and is responsible for the data transfer. The AC outlet should be installed near the XRpad IPU-2

and should be easily accessible.

Figure 7

Wired Connection of the X-ray Detector

The XRpad IPU-2 may be mounted in an equipment enclosure if there is adequate ventilation

within the equipment enclosure. The XRpad IPU-2 is connected to the Imaging Workstation

using a Cat 5e/6 cable. Make sure that the XRpad IPU-2 is not connected directly with the

clinical network. The Trigger I/F of the XRpad IPU-2 must be connected with the Generator

and with the Hand switch if the detector is used in external trigger mode.

The XRpad IPU-2 communicates using a standard Gigabit Ethernet network Interface and comes

equipped with an RJ45 interface port. Due to the overall network traffic, it is recommended that

you use this interface in a direct (Point-to-Point) connection with the host computer in order to

achieve optimal speed performance. The XRpad IPU-2 should be connected to the host computer

by one of the PerkinElmer XRD GigE Interface Cables or a CAT5e/CAT6 (shielded twisted pair,

stranded, or solid copper conductor) cable. The cable length can be up to 31 m.

Patient

X-Ray

Source

Interface

Power Unit

Generator

Hand Switch

XRpad LPT Detector Cable

Imaging

Workstation

Cat 5e/6

Operator Room

Exposure Room

Battery

Pack

Battery Charger

Содержание XRpad2 4336




































































Результаты поиска

Содержание XRpad2 4336

Отзывы:

Perkin-Elmer XRpad2 4336, Руководство пользователя, Страница: 39 / 67

Результаты поиска

Содержание XRpad2 4336

Отзывы: