Perkin-Elmer XRpad2 4336 Скачать руководство пользователя страница 27

Страница: 27 / 67

68153 01

www.perkinelmer.com

XRpad2 4336

IGIT

MAGING

8.5

X-ray Detector Accessories

The X-ray detector shall only be used with its approved OEM Lithium Battery Pack XRpad2 LBP,

cables, and connectors. Product certification and warranty are rendered void if any modification

or alteration to the product is made, or any instruction, warning, or caution is not followed. It is

important that the X-ray detector is not directly connected to the clinical network. Connection of

the X-ray detector directly with the clinical computer network may disturb the IT environment.

The imaging workstation and the Wi-Fi access point must comply with IEC 60601-1 and/or

IEC 60950-1, depending on the usage and application.

Table 8

includes a list of accessories for the X-ray detector.

Table 8

Accessories for the X-ray Detector

PerkinElmer Article No.

Description

95510949H-01

XRpad2 LBP (Lithium Battery Pack)

95510921H

XRpad LBC (Lithium Battery Charger)

95510928H

XRpad IPU-2 (Interface Power Unit)

95510970H

XRpad2 LPT Detector Cable

95510590H

XRpad2 Protective Insert

95510246H

AC Cable IEC 60320 C13 DE

95510249H

AC Cable IEC 60320 C13 US

95510256H

Trigger Cable 5 m/16.5 ft

95510257H

Trigger Cable 20 m/65.5 ft

95510621H

XRD GigE Interface Cable 7.6 m/25 ft

95510622H

XRD GigE Interface Cable 15.25 m/50 ft

95510623H

XRD GigE Interface Cable 30.5 m/100 ft

Содержание XRpad2 4336




































































Результаты поиска

Содержание XRpad2 4336

Отзывы:

Perkin-Elmer XRpad2 4336, Руководство пользователя, Страница: 27 / 67

Результаты поиска

Содержание XRpad2 4336

Отзывы: