HATR Sampling Accessory User’s Guide . 9
Installing the Accessory
Fitting the Accessory
The HATR Sampling Accessory can be simply installed into the sample compartment of the
spectrometer, after first removing any other sampling accessory that is currently fitted.
To remove the current accessory and then install the HATR:
1.
Raise the sample cover to the vertical position, press the release clip and lift the cover
upwards, clear of the instrument.
Store it in a safe place for future re-use.
2.
Reach in under the base of the current accessory and pull the release handle towards
you to release the accessory.
3.
Now simply slide the accessory out of the sample area (Figure 4).
Store it in a safe place for future re-use.
Figure 4 Removing the basic sample slide
