Made in Germany
Made in Germany
Made in Germany
Unscrew the oxygen pressure reducer in counter-clockwise sense.
The oxygen cylinder is likewise fastened with a holder on the carrying
rack.
Loosen the holder with a cross-recess screwdriver in counter-clockwi-
se sense (cross recess size 3).
Replace the empty oxygen cylinder with a full one, or refill the oxygen
cylinder with a suitable refill device.
Screw again the holder for the oxygen cylinder with the cross recess
screwdriver in clockwise sense. The cylinder valve must point towards
the left.
Screw the oxygen pressure reducer in clockwise sense on the oxygen
cylinder (SW 32, right-hand thread).
11. Behaviour in case of trouble
and maintenance
Regularly check the hoses for cracks and leakage (visual test).
Exchange the supply pipe with individual cylinder safety elements,
when individual elements become loose after a flame flashback.
The hose eventually become porous with time. Therefore, replace the
supply pipe as soon as small cracks appear on the hoses.
12. Transport and storage
For transport, the valve of the oxygen
cylinder and that of the propane cylin-
der must be closed.
The pressure redu-
cers may be connected to the cylinder
valves during transport in a vehicle.
The brazing device conforms to the
transport guidelines of DIN EN 962 and
the transportation regulation for the protection of shut-off valves. It
can be transported without conversion in the installation vehicle. The
device is TÜV-certified as a unit.
Secure the brazing device against toppling and slipping on the
loading surface. For transport in a car, leave a gap in the window
wide open. The small van must have a ventilation system.
Do not store the brazing device in drawers, cupboards, or containers
with lid (danger of explosion).
Do not keep empty cylinders in cellars, garages, or passages.
13. PERKEO craftsman tips
For Germany:
This brazing device makes you independent from gas suppliers. Both
cylinders - the propane as well as the oxygen cylinder, can be refilled
by you using an appropriate refill adapter in your own premises. The
provisions in other countries can be different and must be checked in
advance.
According to the pressure tank ordinance, (4 Section § 29) you can
refill the oxygen cylinder in your own premises. For this, there is the
PERKEO refill bend made of copper -
Article No. 607
or the flexible
PERKEO refill hose
Article No. 607/10.
At best, you should use an
oxygen cylinder with at least 10 l content. The provisions of TRG 280,
400, 402 must be observed.
In accordance with TRG 402, you can refill the propane cylinder in
your own premises. The notes on refill and safety are found on the
refill instructions on the propane cylinder. For this purpose, there is
the PERKEO refill nozzle
Article No. 797/04.
You can operate the brazing device also with a different torch nozzle
or with a cutting nozzle series KLEIN RISTA.
14. PERKEO safety notes
Propane gas is highly flammable, colourless, heavier than air, and has
remarkable smell.
Propane cylinders and oxygen cylinders may not be left at children
disposal.
Store propane and oxygen cylinders in a well-ventilated place.
Do not smoke when working on the cylinders.
Keep propane cylinders and oxygen cylinders away from ignition
sources.
Check the leakage of screw connections with leather-forming media
(e.g. soap water, leakage detection spray).
Close the cylinder valves in case of faults and after work.
Do not use the brazing device in a horizontal posture. In a horizontal
posture, propane cylinder, liquid gas penetrates into the constant
propane regulator and the torch nozzle and causes malfunction.
15. Safety regulations
and standards
Legal safety regulations and technical guidelines must be observed.
Repairs may be performed only by PERKEO or by an authorised
specialist workshop.
Do not leave the brazing device without monitoring during
application. An acute danger of fire exists.
Keep the device free of oil and fat.
Oils and fats of all kinds can ignite explosively in the presence of
pure oxygen.
Wear a pair of welding protective goggles.
Wear hardly inflammable cloth.
Cater for adequate ventilation.
Ensure that the manometer on the oxygen pressure reducer is
firmly seated. Replace damaged manometer only with original
spare parts.
Standards and regulations: BGR 500, EN 417, DIN EN 559, EN 730-1,
EN 730-2, ÖNORM EN 730, BGV B7, DIN EN ISO 2503, ISO 5175, AS
4603, SABS, TRG, TRF, devices safety law.
AE/BA-BDF-1.3XA-2.14.13.25.4.11.12.0.13.13/0.11.1
Made in Germany
PERKEO-WERK GMBH+CO.KG · Talweg 5 · D-71701 Schwieberdingen
Phone: +49 (0) 7150-3 50 43-0 · Fax: +49 (0) 7150-3 50 43-40
www.
perkeo-werk.
de
Made in Germany
Operating Manual
ECONOMY
Article No.
799/16/01/4
Fault
Cause/remedy
The flame becomes
yellow.
Then either the oxygen cylinder valve is
closed or the oxygen cylinder is empty.
Open the oxygen cylinder valve.
Replace the empty oxygen cylinder with a
full one, or refill the oxygen cylinder with
a suitable refill device.
The flame becomes
smaller or lifts off the
torch.
Either the propane cylinder valve is closed
or the propane cylinder is empty.
Open the propane cylinder valve by
rotating it in counter-clockwise sense
(further) or replace the propane cylinder.
16. Notes
You recognise PERKEO devices in their robust engineering,
insusceptibility to malfunction and repair, service life and in such
things worked out to the smallest detail. We are always grateful
about suggestions from our customers, to design our products in a
better, more practical and thoughtful manner. Every PERKEO device
is thoroughly tested prior to leaving the factory. Nonetheless, should
a reason for complaint arise - please return the device unchanged.
17. Technical data and spare parts
799/16/01/4/G
ECONOMY sheet metal rack
795/oF/1/T
Propane cylinder with 0.425 kg filling
44 4/2L
Oxygen cylinder 2 l / 0.4 m
3
381/K
Oxygen-pressure reducer 0 – 10/16 bar
570/T
Constant propane regulator with thread G 3/8" LH
828/T6
KLEIN RISTA handle with fine regulating valves
820/P
KLEIN RISTA brazing nozzle,
size 3 for 2 – 4 mm material thickness
415/02/99
3 m rubber supply hose with individual cylinders,
non-return valves und flame arrester
according to BGR 500
206/36
Velcro strap for holding the hose
Flame temperature: 2,800°C
Operating duration of propane: 2 h. 10 min.
Operating duration of oxygen: 1 h. 40 min.
Dimensions: 540 x 340 x 125 mm
Weight: 12.60 kg
Propane,
UN 1965 (accord. to DIN 51622),
Class 2, Item 2F ADR
Oxygen, UN 1072,
Class 2, Item 10 ADR
2
2
5.1
Titel
Rückseite
BA_ECONOMY_10-Seiter_78x155mm_en_050511_PERKEO_BA_ECONOMY_78x155mm 05.05.2011 12:51 Seite 1
