Perimeter PWF-100, Руководство пользователя

Страница: 14 / 24

12
Owner’s Guide
PWF-100
Calibrating Your System
Your system comes pre-calibrated from
the factory for a displayed distance ac-
curacy of +/- 15% on the SmartStation
display, therefore, should the display read
50 ft. of distance between the SmartSta-
tion and the PetLink collar, the actual
distance could be between 43 ft. - 57 ft.
This distance is only intended on being
helpful for you to determine the approxi-
mate distance to the boundary you set
and your dog’s proximity to the boundary
location. This in no way determines the
consistency of your pet boundary location.
It is recommended that you maintain the
factory preset calibration for optimal sys-
tem performance and your convenience.
However, should you desire greater
measurement accuracy you can manually
calibrate your system by following the fol-
lowing process, where maximum distance
accuracy can be achieved.
1. Push and release the center SELECT
button on the SmartStation ™ to enter
the programming menu. The display
should read MENU: BOUNDARY. This
calibration process will only need to be
performed once. The settings will be
retained in the system memory even if
power is interrupted.
2. Press the down arrow until the screen
displays – MENU: CALIBRATION
3. Press and release the right arrow (>) to
select.
Before proceeding to step 4. you will need
to understand the system’s SLEEP MODE.
4. Have a partner hold the PetLink ™ collar
and move 3 feet away from the Smart-
Station. Three feet is approximately one
large adult step. Press and release the
SELECT button. Now move the PetLink
™
collar approximately 6 feet away from
the SmartStation
™
and again press and
release the SELECT button. Finally, move
the collar approximately 12 feet from the
SmartStation
™ and press and release the
SELECT button. You can perform this pro-
cess alone by moving the collar across
a room and returning to the SmartSta-
tion
™ to SELECT the distance.
5. The SmartStation
™
display will auto-
matically return to the HOME DISPLAY
when calibration process is complete.
OPTIONAL STEP