Del
Mar
Pavilions
Step 2.
Attach dual support beam to posts with four bolts (6 ” x 3/8”) washers & nuts. (Match numbers). Tap
the bolt all the way into the wood to set it, then add a washer and nut and lightly tighten.
Repeat this step with the other dual support beam.
One the 2 supports have one large beam already attached or a few 18” pieces depending on size, this add support
and strength to the structure. This beam must be in the interior of the support and bolted after you attach the
supports to posts as shown below:
Beam between the
supports
Attach with carriage bolts, washers
and nuts. The quantity of bolts
depends on supports length.
