Performax 241-0993, Руководство оператора, Страница: 12 / 20

Page 11
DUST BAG (FIG. 9-10)
• The planer is equipped with two dust/
chip extraction ports, either which may
be used with a dust bag to keep your
work environment cleaner.
• When planing, attach the dust bag to
the dust/chip extraction port for smaller
jobs. In addition, wear a suitable dust
mask, as there may be some residual
airborne dust particles in the area.
• To attach the dust bag (FIG. 9): Align
the raised emboss on the dust bag with
the groove in the extraction port, and
slide the dust bag into the port. Then
rotate the dust bag towards the front of
tool to lock it in place. Use the dust/
chip extraction guide switch to direct
the dust to the side on which the dust
bag is attached.
• Empty the dust bag: Empty the dust bag
by unzipping the bag (FIG. 10) and then
gently tap the bag to remove the dust.
• For a more thorough cleaning of the
dust bag, slip the bag off of the frame
and the turn bag inside out. Use a soft
brush to brush the dust off of the lining.
FIG. 9
FIG. 10
BLADE CHANGE WRENCH
STORAGE AREA (FIG. 11)
Your tool is equipped with a blade wrench
that is conveniently located in the handle
base, where it is always handy and unlikely
to get lost or misplaced.
FIG. 11
TOOL PARK REST (FIG. 12)
The park rest swings down to help to keep
the blade from coming in contact with the
work surface when the planer is not in use
(FIG. 12). The tool park rest was designed to
swing up and out of the way by itself when
the back of the planer crosses the leading
edge of the workpiece.
FIG. 12
Tool park rest
ASSEMBLY