Performax 241-0985 Скачать руководство пользователя страница 21

 

21 

 

Rev 1.2   19/06/2012

 

PERFORMAX

®

 14 AMP CIRCULAR SAW WARRANTY 

 

30-DAY MONEY BACK GUARANTEE: 

This PERFORMAX

®

 brand power tool carries our 30-Day Money Back 

Guarantee.  If you are not completely satisfied with your PERFORMAX

®

 brand 

power tool for any reason within thirty (30) days from the date of purchase, return 

the tool with your original receipt to any MENARDS

®

 retail store, and we will 

provide you a refund – no questions asked. 

 

2-YEAR LIMITED WARRANTY:   

This PERFORMAX

®

 brand power tool carries a 2-Year Limited Warranty to the 

original purchaser.  If, during normal use, this PERFORMAX

®

 power tool breaks 

or fails due to a defect in material or workmanship within two (2) years from the 

date of original purchase, simply bring this tool with the original sales receipt 

back to your nearest MENARDS® retail store.  At its discretion, PERFORMAX

®

 

agrees to have the tool or any defective part(s) repaired or replaced with the 

same or similar PERFORMAX

®

 product or part free of charge, within the stated 

warranty period, when returned by the original purchaser with original sales 

receipt.   Not withstanding the foregoing, this limited warranty does not cover any 

damage that has resulted from abuse or misuse of the Merchandise.  This 

warranty: (1) excludes expendable parts including but not limited to blades, 

brushes, belts, bits, light bulbs, and/or batteries; (2) shall be void if this tool is 

used for commercial and/or rental purposes; and (3) does not cover any losses, 

injuries to persons/property or costs.  This warranty does give you specific legal 

rights and you may have other rights, which vary from state to state.  Be careful, 

tools are dangerous if improperly used or maintained.  Seller’s employees are 

not qualified to advise you on the use of this Merchandise.  Any oral 

representation(s) made will not be binding on seller or its employees.  The rights 

under this limited warranty are to the original purchaser of the Merchandise and 

may not be transferred to any subsequent owner.  This limited warranty is in lieu 

of all warranties, expressed or implied including warranties or merchantability 

and fitness for a particular purpose.  Seller shall not be liable for any special, 

incidental, or consequential damages.  The sole exclusive remedy against the 

seller will be for the replacement of any defects as provided herein, as long as 

the seller is willing or able to replace this product or is willing to refund the 

purchase price as provided above.  For insurance purposes, seller is not allowed 

to demonstrate any of these power tools for you. 

 

For questions / comments, technical assistance or repair parts –  

Please Call Toll Free at:  1-866-349-8665 (M-F 8am – 6pm)

 

 

SAVE YOUR RECEIPTS. THIS WARRANTY IS VOID WITHOUT THEM.

 

Distributed by: Menard, Inc., Eau Claire, WI 54703 

 

Содержание 241-0985






















Отзывы: