Performax 241-0967, Руководство пользователя, Страница: 7 / 20

7
WARNING:
Know your rotary tool. Do
not plug the tool into the power source until
you have read and understand this
Instruction Manual. Learn the tool’s
applications and limitations, as well as the
specific potential hazards related to this tool.
Following this rule will reduce the risk of electric
shock, fire, or serious injury.
Always wear eye protection. Any
power tool can throw foreign
objects into your eyes and cause
permanent eye damage.
ALWAYS wear safety goggles (not glasses) that
comply with ANSI safety standard Z87.1.
Everyday glasses have only impact resistant
lenses. They ARE NOT safety glasses.
WARNING:
Glasses or goggles not in
compliance with ANSI Z87.1 could cause
serious injury when they break.
Hold tool by insulated gripping surfaces
when performing an operation where the
cutting tool may contact hidden wiring or its
own cord.
Contact with a “live” wire will make
exposed metal parts of the tool “live” and shock
the operator.
Always make sure the work surface is free
from nails and other foreign objects.
Cutting
into a nail can cause the bit and the tool to jump
and damage the bit.
Never hold the workpiece in one hand and
the tool in the other hand when in use.
Never
place the hands near or below the cutting
surface. Clamping the material and guiding the
tool with both hands is much safer.
Never lay workpiece on hard surfaces like
concrete, stone, etc.
Protruding cutting bit may
cause the tool to jump.
Always wear safety goggles and dust mask.
Use only in well-ventilated area.
Using
personal safety devices and working in a safe
environment reduces risk of injury.
After changing the bits and accessories or
making adjustments, make sure the collet
nut and any other adjustment devices are
securely tightened.
Loose adjustment devices
will be violently thrown.
Always use the correct collet size. If the collet
size is larger than the accessory shank size it
will not grip the shank properly, leading to
possible injury to the operator or damage to the
tool.
Always check accessory bits, grinding
stones, cut-off wheels etc. for damage
before each use.
Damaged accessories can
break during use and cause serious injury.
Never use dull or damaged bits. Sharp bits
must be handled with care.
Damaged bits can
snap during use. Dull bits require more force to
push the tool, possibly causing the bit to break.
Never touch the bit during or immediately
after use.
After use the bit is too hot to be
touched by bare hands.
SPECIFIC SAFETY RULES
SAVE THESE INSTRUCTIONS FOR REFERENCE
!
!