8
√
If you are not thoroughly familiar with the operation
of a reciprocating saw,
obtain advice from a qualified person.
√
When servicing,
use only identical replacement parts.
√
Avoid cutting nails and staples when operating with the wood blade.
Inspect the workpiece carefully and remove all nails and staples before
operation.
√
Make sure
that the blade always extends beyond the shoe and the workpiece
throughout the stroke. Blades may shatter if they strike the workpiece or
shoe.
√
Do not cut an oversized workpiece.
√
Check for proper clearance
beyond the workpiece before cutting, so that the
blade will not strike the floor, workbench, etc.
√
Make sure that the blade
is not contacting the workpiece before the switch
is turned on.
√
keep the saw blades clean and sharp.
√
Use only correct blades.
Always use blades recommended for the type of
workpiece.
√
Do not leave the tool running.
Operate the tool only when hand-held.
√
Always release the switch to “OFF” and wait for the tool to come to a
complete stop before removing the blade from the workpiece.
√
keep the handle dry, clean, and free from oil and grease.
Always use a
clean cloth when cleaning. Do not use solvents, brake fluids, gasoline or other
petroleum products to clean the tool; they may damage plastic parts.
√
Do not operate this tool in a gaseous or explosive environment or near
explosive materials.
√
Never force the tool.
Apply firm pressure against the saw’s pivot shoe for
the sawing operation--too little or too much pressure could cause jumping or
vibration and may break the blade.
√
Never
operate the saw without the pivot shoe in position. The spindle may
strike against the workpiece and damage the reciprocating mechanism.
√
Do not touch the blade
or the workpiece immediately after the sawing
operation. They may be extremely hot and could burn your skin.
√
Hold the tool firmly
with two hands when operating the tool.
√
Do not reach underneath
the workpiece. The proximity of the blade to your
hand is hidden from your sight.
