Performax 241-0502, Руководство пользователя

Страница: 19 / 31

19
VARIABLE-SPEED TRIGGER SWITCH
This drill is equipped with a variable-speed
ON/OFF trigger switch.
1. To start drill, gently squeeze the
trigger switch (1) (Fig. 10).
NOTE: The drill will turn at its slowest
speed when the trigger switch is
depressed slightly. The drill will turn at its
fastest speed when the trigger switch is
fully depressed.
2. To stop the drill, release the trigger
switch.
NOTE: Drilling at a slow speed for an
extended period of time may cause the drill
motor or the battery pack to overheat. If
either the drill or the battery get hot, stop
drilling and allow them to cool for at least
15 minutes.
LED WORK LIGHT
The LED work light (2) will automatically
turn ON when the trigger switch (1) is
squeezed (Fig. 11). It will automatically
turn OFF when the trigger switch is
released.
INSTALLING DRILL BITS
WARNING:
Never hold the chuck
body with one hand and use the drill
power to rotate the drill body to loosen
or tighten bits. Serious injury may
result.
This drill is equipped with a keyless chuck.
This chuck is designed to provide easy
one-handed tightening and loosening of
the chuck jaws.
ASSEMBLY AND OPERATING
!
Fig. 10
Fig. 11