background image

3

• Adjustable wrench     • Hammer and block of wood or rubber mallet     • slotted screwdriver

PACKAGING CONTENTS

PACKAGING CONTENTS

1  Seat Cushion with

Lifting Lever 

1

2  Lifting Unit 

1

3  Tool Tray Assembly

(5 pc 2 1/2 casters attached) 

1

 # 

Description 

Quantity

2

3

1

1. Loosen fasteners (B).

2. MAKE SURE the tray is on a firm surface with

the wheels down. Insert the lifting unit (C)
into the tool tray hole (E). The bigger end of
the lifting unit (C) is the end that inserts into
the tool tray hole (E). It might be necessary
to seat the lifting unit (C). Do this by holding
a block of wood over the top of the lifting unit
and gently tapping with hammer to seat the
lifting unit. NOTE: It might be easier to position
the tray (D), wheels down, on the grass or a
surface that is not smooth.

3. ATTACH the seat (A) to the lifting unit (C)

4. MAKE SURE all fasteners are tightened (B).

NOTE: It is recommended you take the time to

make sure that the casters (F) are tight.

5. TO RAISE seat, stand next to stool. Lift

handle, and release when seat is at the
desired height.

6. TO LOWER seat, sit on the stool. Lift handle,

and release when the seat is at the desired
height.

ASSEMBLY INSTRUCTIONS

A

B

C

B

D

E

F

Fig. 1

Содержание W85008

Страница 1: ...e not fluent in English the product warnings and instructions shall be read and discussed with the operators native language by the purchaser owner or his designee Make sure that the operator comprehends its contents Safety information shall be emphasized and understood prior to usage The stool shall be inspected per the operating instructions Users of this stool must fully understand these instru...

Страница 2: ...ense and caution are factors which cannot be built into this product but must be supplied by the operator WARNING This product and its packaging contain a chemical known to the State of California to cause cancer birth defects or other reproduc tive harm WARNING Read and understand this entire instruction manual before attempting to assemble install operate or maintain this stool Failure to comply...

Страница 3: ...It might be necessary to seat the lifting unit C Do this by holding a block of wood over the top of the lifting unit and gently tapping with hammer to seat the lifting unit NOTE It might be easier to position the tray D wheels down on the grass or a surface that is not smooth 3 ATTACH the seat A to the lifting unit C 4 MAKE SURE all fasteners are tightened B NOTE It is recommended you take the tim...

Страница 4: ...ply to any product or part which has been subject to misuse neglect accident or wear and tear incident to normal use and service PERFORMANCE TOOL does not authorize any other person to make any warranty or to assume any liability in connection with its products Except for warranties of title and the limited express warranties set forth above PERFORMANCE TOOL makes no express or implied warranties ...

Отзывы: