Performance Tool W53995, Руководство пользователя

Страница: 4 / 8

4
ASSEMBLY
WARNING
READ ALL WARNINGS IN THIS MANUAL BEFORE ASSEMBLING AND
OPERATING THIS TOOL CART.
1. Slide Legs (#1) into square holes cut in
Tray (#2) until bolt holes are aligned at
top of Legs(#1).
2. Insert Bolt (#9) and Washer (#10) into
hole on Leg (#1) and Tray (#2). Fasten
Bolt (#9) using Spring Washer (#11) and
Washer (#10), BUT DO NOT TIGHTEN
NUT COMPLETELY AT THIS TIME (#9,
#10, #11, #12). Repeat this procedure
on all four corners.
3. Slide Connect Leg (#3) into square
holes cut in bottom Tray (#2) until bolt
holes are aligned at top of Connect
Legs (#3) (The plastic end should be
placed towards the ground).
4. Repeat Step 2 with bottom Tray (#2).
5. Connect with the Legs (#1, #3).
6. Insert Bolt (#6) and Washer (#8) into
hole on leg (#1) and Connect Leg (#3).
7. Fasten Bolt (#6) using Spring Washer
(#7) and Washer (#8), BUT DO NOT
TIGHTEN NUT COMPLETELY. AT THIS
TIME (#6, #7 #8). Repeat this procedure
on four corners.
8. Insert Casters (#4, #5) into the plastic
end of Connect Leg (#3).
NOTE
Insert the two Locking Casters (#5) at
the same end of the cart.
9. Now go back and tighten all loose nut
and bolts. (Suggested torque: 60 in./Ib.)