14
3
Threaded-tip shanks
Threaded-tip shanks are used for
felt polishing wheels. Shanks with a
long threaded tip are used for pointed
polishing wheels while shanks with
short threaded tips are used for round
felt polishing wheels. To install a felt
polishing wheel, simply screw it onto the
threaded shank.
Screw shanks
Screw shanks are used for mounting
cutting wheels.
Sanding band shanks
Sanding band shanks feature an
expanding core that hold disposable
bands securely. To contract the core
to remove or install a band, loosen the
screw. Tightening the screw expands
the core.
ACCESSORIES
UNPACKING AND INSPECTION
SPECIFICATIONS
After opening the carton, unpack your new product and related parts & accessories.
Please inspect it carefully for any damage that may have occurred during transit.
Please check it against the photograph on carton, if available.
WARNING DO NOT operate this product if damaged during shipment, handling
or misuse. Do not operate the product until the parts have been replaced or the
fault rectified. Failure to do so may result in serious personal injury or property
damage. All damaged parts must be repaired or replaced as needed prior to
operating this product. Check to see that all nuts, bolts and fittings are secure
before putting this product into service.
Please have the serial number, model number, and date of purchase available for
reference when calling.
Input ......................................... 120 Volt ~ 60Hz
Current ................................. .7 Amps (no load)
No Load Speed ............................. 16,000 RPM
Dimensions .........................4-3/4 in. x 1-3/8 in.
Shank Size ............................................... 1/8 in.
Collet Sizes ................1 & 2 mm, 3/32 & 1/8 in.
Specifications are
subject to change
without notice.
IMPORTANT SAFETY INFORMATION
WARNING
READ, UNDERSTAND AND FOLLOW ALL INSTRUCTIONS AND WARNINGS
BEFORE OPERATING THIS PRODUCT. FAILURE TO DO SO MAY RESULT IN
PERSONAL INJURY AND/OR PROPERTY DAMAGE AND WILL VOID
WARRANTY.