WARNING:
Read and understand all instructions. Failure to follow all instructions listed below may result in elec-
tric shock, fire and/or serious personal injury.
Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
Do not operate power tools in potentially explosive environments, such as in the presence of flammable liquids,
gas or dust. Power tools create sparks that may ignite dust or fumes.
Keep bystanders, children and visitors away while operating the tool. Distractions can cause the operator
to lose control.
Stay alert, be aware of the surroundings, and use common sense when operating a power tool. Do not use a power
tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating a
power tool may result in serious personal injury.
Dress properly. Do not wear loose clothing or jewelry.
Contain long hair. Keep hair, clothing, and gloves away from moving parts. Loose clothing, jewellery, or long hair
can get caught in moving parts.
Avoid accidental start-ups. Verify that the switch is in the OFF position before plugging in the tool. Carrying a
power tool with a finger on the switch or plugging in a tool that has the switch in the ON position invites accidents.
Remove adjusting keys and wrenches before turning the tool ON. A wrench or key that is left attached to a rotating
part of the tool may result in personal injury.
Do not overreach. Keep proper footing and balance at all times. Proper footing and balance allows the operator to
maintain better control of the tool in unexpected situations.
Use safety equipment. Always wear eye protection.
Use a dust mask, non-skid safety shoes, a hardhat, or hearing protection when appropriate.
GENERAL SAFETY RULES
PERSONAL SAFETY
2
This nut thread setter kit is a great way to add backless attachment points anywhere you need them with just
a single hole. This kit includes a rugged thread setting tool, along with various sized mandrels and nosepieces,
40 assorted thread nuts, a wrench, and a handy storage case.
1. Drill the recommended diameter hole for the chosen threaded insert into the workpiece.
Insert Size Use Drill Insert Size Use Drill Insert Size
Use Drill Insert Size Use Drill
3 mm
5 mm 4 mm 6 mm 5 mm
7 mm 6 mm 9 mm
2. Select the matching mandrel and nose piece from the kit.
OPERATION INSTRUCTIONS
